This article will help you on How To Unroot / Unbrick Samsung Galaxy S4 Value Edition (Bootloop Fix).This guide also help you to return back to the stock ROM On Samsung Galaxy S4 Value Edition.How To Unroot / Unbrick Samsung Galaxy S4 Value Edition (Bootloop Fix) *This guide is only for the Samsung Galaxy S4 Value Edition android smartphone. Don’t try this method on any of other Android devices, It may hard brick your device. Related Post:
How to Root Samsung Galaxy J5 Safely without PC How To Unroot / Unbrick Samsung Galaxy J7 (SM-J700F)
PRE-REQUIREMENTS
How To Unroot / Unbrick Samsung Galaxy S4 Value Edition (Bootloop Fix)
- BACKUP YOUR ANDROID DATA Before following this tutorial we highly recommend to take a full backup of your current ROM in TWRP (If your phone is not bricked), or you can take backup of your contacts, messages and other important documents.
- INSTALL SAMSUNG GALAXY DRIVERS First you need to Setup ADB and Fastboot Drivers on windows PC. SETUP ADB & FASTBOOT DRIVERS ON PC Now you need to install the USB drivers to connect your device with the computer to follow this guide. Without these USB drivers you can’t connect your device to the PC, first download and install these drivers on your system. DOWNLOAD ANDROID USB DRIVERS Setting->About Phone->Build Number->Tap 7 times on build number->It will enable the developer mode in the main setting->Go to Developer->Enable the Debugging Make sure that your phone has more than 60% charge. After following the above mention steps follow the below mention guide How To Unroot / Unbrick Samsung Galaxy S4 Value Edition (Bootloop Fix) Back to Stock. How To Unroot / Unbrick Samsung Galaxy S4 Value Edition (Bootloop Fix) Back to stock ROM Download USB Drivers USB DRIVERS Download the stock ROM Stock ROM for your Samsung Galaxy S4 Value Edition Download ODIN tool Latest ODIN Tool
How To Unroot / Unbrick Samsung Galaxy S4 Value Edition (Bootloop Fix)
Step By Step Guide
First install Samsung Galaxy S4 Value Edition USB drivers on Windows PC (From above Link).Then Download the Samsung Galaxy S4 Value Edition Stock Firmware from the link above and extract the folder on your desktop. Download ODIN flash tool form here to flash the firmware on your phone. Extract the folder and you will see the ODIN.exe file in the folder. Now Turn off your Samsung Galaxy S4 Value Edition and Boot in download mode.(Hold down Volume Down + Home + Power button at the same time) Once your Samsung Galaxy S4 Value Edition is in download mode. Connect it to the PC with USB cable and run the ODIN.exe file on your desktop. If everything is right and drivers are working properly. You will see the blue box on the ODIN screen, if not reinstall the drivers again and reboot your PC. Now select the AP option from the ODIN screen and select the firmware file that you extracted Hit the Start button from the ODIN screen to start the flashing process. Once completed you will see the PASS messages on the ODIN and Phone will reboot automatically. Now you can disconnect your phone.
IMPORTANT:. If you phone stuck on the boot loop or in the Samsung Android Loog. Then turn off the phone and reboot in recovery mode. TO do this Hold down Volume Up + Home + Power button at the same time. Now from recovery select Wipe Data/Factory Reset and after that Wipe cache partition. Now reboot you phone. DONE!!!! You unbricked /Unrooted Your Samsung Galaxy S4 Value Edition.Now your Phone is running the stock ROM.Check it on the setting.ENJOY..:)
