The Xiaomi Redmi Note 5 Pro is a mid-range device and has a great list of specs. It comes equipped with a 5.99-inch IPS LCD display screen having a resolution of 2160x1080p, a Qualcomm SDM636 Snapdragon 636 Octa-Core 1.8GHz Kyro 260, Adreno 509 GPU, 4/6 GB RAM, 64 GB ROM storage capacity, and a non-removable 4000mAh Li-Po battery. It runs on Android 7.1.2 Nougat firmware, and its other features include a dual 12.0 + 5.0 MP primary camera, a 20.0 MP secondary camera, Wi-Fi, Bluetooth v5.0, GPS, and more. In all the Android devices, you will find a crucial feature called the bootloader mode. Each and every device comes with both the Recovery (stock) and the bootloader mode. This mode will allow a user to perform tasks like flashing/modifying the system partitions, unlocking the bootloader, different OEM level operations, installing TWRP or other custom recoveries, and more. This part is basically the fun part where you get to tinker with the settings and give your device a brand new outlook. Today, in this post, we will be sharing with you how to boot your Xiaomi Redmi Note 5 Pro Bootloader/Fastboot mode. There are two methods using which you can boot into Xiaomi Redmi Note 5 Pro Bootloader/Fastboot mode.
Steps To Enter Xiaomi Redmi Note 5 Pro Bootloader/Fastboot Mode
There are two ways which can help you to boot into Xiaomi Redmi Note 5 Pro Bootloader / Fastboot Mode 1) Using Power and Volume Keys 2) fastboot commands via Computer
#1 Using Hardware Keys
Follow the given steps to boot into Xiaomi Redmi Note 5 Pro Bootloader by hardware buttons
You have to Press and hold the power button for a few seconds Now tap the Power Off option when the Power Menu appears Now you have to Wait for the Xiaomi 6 to completely turn off Then press and hold the Power button and the Volume Down button at the same time Continue holding these two buttons down until you boot into Fastboot Mode
#2 Using PC fastboot Commands
If you want to boot Xiaomi Redmi Note 5 Pro into bootloader mode from your PC, then follow the linked guide below
Connect your android to your PC with USB cable Now go to ADB & fastboot folder and Open the command window there(Right click on the empty space inside the folder then select “Open command window here” or “Open PowerShell Window Here” option to launch a command window Now reboot into the bootloader by issuing the following commands. (Make sure your device is detected by your PC)
So that’s it for the guide. If you find this helpful share the guide with your friends and family. cheers !!
